3
SimpliFire • SF-WM36, SF-WM58, SF-WM70, SF-WM94 Service Manual • 2040-908 Rev. D • 1/19
7. Remove the screen by lifting a corner and working it
out of the top of the appliance chassis. See Figure 7.
Figure 7 Screen Removal
8. Lift the screen out of the bottom of the appliance.
9. Replace the screen with the replacement screen.
10. Reverse steps of the Screen Replacement Instruct-
ions to secure the screen in the appliance.
11. Install the Glass Front. See the Glass Front Installa-
tion Instructions.
Flame Rod Installation
1. Switch the main switch control on the right corner of
the appliance to the OFF position.
2. Unplug the power input cord from the wall receptacle.
3. Remove Glass Front. Refer to Glass Front Installa-
tion instructions.
4. Remove Screen. Refer to Screen Installation
instructions.
Figure 8 Flame Rod
FLAME ROD
5. Remove screw in the center bracket that is holding
the Flame Rod in place. See Figure 9.
Figure 9 Center Bracket - Flame Rod
REMOVE SCREW
6. Pull out the black rubber end of the Flame Rod
located on the right side of the appliance. See Figure
10.
Figure 10 Black Rubber End of Flame Rod
BLACK RUBBER
END OF FLAME ROD
6. Remove Flame Rod from appliance. See Figure 11.
Figure 11 Remove Flame Rod
7. Replace the Flame Rod with the replacement.
8. Reverse steps of the Flame Rod Installation instruc
tons.
10. Reverse steps of the Screen Replacement Instruct-
ions to secure the screen in the appliance.
11. Install the Glass Front. See the Glass Front Installa-
tion Instructions.
