1
SimpliFire • SF-WM36, SF-WM58, SF-WM70, SF-WM94 Service Manual • 2040-908 Rev. D • 1/19
SERVICE MANUAL
(Power Cord, Stones, Fan Box, Glass Front, Mounting Bracket, Screen & Flame Rod)
Model: SF-WM36, SF-WM58, SF-WM70, SF-WM94
- Instructions -
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during
installation and service. Sheet metal edges are sharp.
Leave this manual with party responsible for use
and operation.
WARNING: If the information in these
instructions is not followed exactly it
may result in personal injury and/or prop-
erty damage.
NOTICE! DO NOT discard this manual.
Important service
and maintenance instructions included.
Tools and Supplies Needed
Before beginning the installation be sure that the following
tools and building supplies are available.
Pliers
Phillips screwdriver
Electric drill and bits (1/4 in.)
Flat blade screwdriver
Replacement Instructions
Power Input Cord Installation
1. Switch the main switch control on the right corner of
the appliance to the OFF position.
2. Unplug the power input cord from the wall receptacle.
3. Locate power input cord connection located on the
lower right corner of the appliance.
4. Remove one screw and metal strain relief bracket.
See Figure 1 (SF-WM36) and Figure 2 (SF-WM58 &
SF-WM70).
5. Unplug cord from appliance.
6. Install new cord on appliance and install metal
strain relief bracket with one screw. See Figure 1
(SF-WM36) and Figure 2 (SF-WM58 & SF-WM70).
7. Plug cord into wall receptacle.
Figure 1 (SF-WM36) Power Input Cord and Strain Relief
Bracket on Lower Right of Appliance
NOTICE! DO NOT discard any hardware while
servicing.
It must be reused.
Figure 2 (SF-WM58 & SF-WM70) Power Input Cord and
Strain Relief Bracket on Lower Right of Appliance
WARNING! Risk of Shock! Always unplug the
cord before moving or servicing.
