SIMPLICITY PARTS BREAKDOWN
Once you have completed the ground preparation, you should open all the cartons of the pool to become familiar with all of its components.
You should also refer to the breakdown sheet that is packed with your pool and make sure that you
ha
ve the correct number of each
component necessary to complete your pool. If you are missing any parts, or you have received any damaged parts, you should notify the
dealer where you purchased the pool before beginning the assembly.
STEP 3: BOTTOM RAIL CONNECTOR ASSEMBLY
Bottom rails and bottom rail connectors are the ones that go on the ground. You need to take them and place them in a circle along the
circumference of the pool area. Assemble the bottom rails with the bottom rail connectors. Check roundness of your circle by measuring the
diameter across in several locations. DO NOT SKIP THIS STEP! Otherwise, you might end up with an oval shape, which will cause
problems later on. Once you establish a true circle, stake the bottom rails at ever
y
other rail with a screwdriver or small stake to ensure that
it stays in place during the remainder of the installation.
Measure from bottom rail connector to opposite bottom rail
connector at several connectors to ensure roundness.
