34
Troubleshooting, Adjustment, & Service
HEADLIGHT REPLACEMENT
See Figure 49.
1. Open the hood.
2. Remove the light bulb socket from the bezel by twist-
ing it counterclockwise and pulling it out.
3. Remove and replace the light bulb with an identical
bulb.
4. Reinstall the socket into the bezel.
DASHLIGHT REPLACEMENT
See Figure 50.
1. Open the hood.
2. Twist the socket (A) counterclockwise and pull out to
remove it from the back of the dashboard display (B).
3. Remove and replace the old bulb with a new identical
bulb.
4. Reinstall the socket into the dashboard display.
TRANSMISSION PURGING
Purge the transmission if the unit is excessively noisy or
lacks drive in forward or reverse.
1. Elevate the rear end of the tractor using a chain hoist
or floor jack. Support the rear of the unit using jack-
stands. Elevate the unit just high enough for the rear
wheels to clear the ground.
2. Activate the seat switch, depress the clutch / brake
pedal, and start the engine. After the engine has
started, set throttle to IDLE.
3. Release the brake pedal and fully depress the for-
ward ground speed pedal.
4. While holding the ground speed control in forward
position, engage and disengage the transmission
release valve lever (A, Figure 51) several times.
5. Fully depress the reverse ground speed pedal.
6. While holding the ground speed control in reverse,
engage and disengage the transmission release
valve lever (A) several times.
7. Engage the transmission release valve lever and
stroke the transmission from full forward to full
reverse several times.
8. Lower the tractor and test run for several minutes.
Figure 49. Headlight Replacement
Figure 50. Dashlight Replacement
A. Dashlight Socket
B. Dashboard Display
B
A
Figure 51. Transmission Release Lever
A. Release Lever (Engaged Position Shown)
A
