13
Attaching & Removing
Removing Dozer & Hitch
NOTE: Whenever removed, install clevis pins, hitch pins,
clips and hardware into dozer and hitch for storage.
1. Fully lower the attachment lift.
2. See Figure 22. Remove the hairpin clip and clevis
pin (C) securing the angling cable (D) to the locking
tab (B).
3. Remove the hair pin clips (A, Figure 22) attaching the
adjustment plate to the dozer blade and remove the
plate from the dozer.
4. See Figure 23. Separate the angling rod (A) and
remove it from the support arm (B) and dozer.
NOTE: The support arm (B, Figure 23) can remain
attached to the tractor.
5. See Figure 24. Disconnect the dozer lift arm (B) from
the hitch lift arm (E).
6. See Figure 25. Remove the 4 safety clips and clevis
pins (B) securing the dozer to the tractor and lift the
dozer off the attachment hooks (C).
7. See Figure 24. Disconnect the lift rod (F) from the lift
extension (H).
8. See Figure 24. Remove the clevis pins (A) attaching
the front and rear of the hitch to the tractor. Remove
the hitch.
9. If the mower deck is being installed, remove the lift
extension (H, Figure 24).
Figure 22. Angling Cable Adjustment
A.
Hair Pin Clips
B.
Locking Tab
C.
Clevis Pin & Hair Pin
D.
Angling Cable
A
A
C
D
B
Figure 24. Lift Rod
A.
Clevis Pin
B.
Dozer Lift Arm
C.
Safety Clip
D.
Ladder Hitch
E.
Hitch Lift Arm
F.
Lift Rod
G.
Front Hitch Bracket
H.
Lift Extension
A
C
D
E
F
G
H
B
A
C
Front
Figure 23. Install Angling Arm
A.
Angling Rod
B.
Support Arm
A
B
Figure 25. Attach Dozer
A.
Dozer Pins
B.
Clevis Pin
C.
Attachment Hooks
A
B
C
