26
Specifications
ENGINE
18 HP Kohler OHC
Model
Kohler OHC Overhead Cam, TH18S
Horsepower
18 HP @ 3600 rpm
Cylinders
2
Bore
3.03 In. (77 mm)
Stroke
2.64 In. (67 mm)
Displacement
35 Cu. In. (574 cc)
Construction
Cast Iron Sleeves,
Aluminum Crankcase
Electrical
12 Volt, 15 Amp Alternator Regulated Battery:
System
390 Cold Cranking Amps, 68 min. Reserve,
Industrial Rated Starter Motor
Ignition
Solid-State Inductive Electronic Ignition
Governor
Internal Flyweight with external Adjustment
Air Cleaner
Dual Element
Lubrication
Full Pressure Lube with Oil Filter
Oil Capacity
3.5 Pints (1.7 L) without Filter
4 Pints (1.9 L) with Filter
Fuel Tank
Material: Non-Corrosive Polyethylene
Fuel Tank, Capacity: 3 Gallons (11.4 L)
Muffler
Quiet Compact, Low Back Pressure
18 HP Kohler
Model
Command OHV
Horsepower
18 HP @ 3600 rpm
Cylinders
2
Bore
3.03 In. (77 mm)
Stroke
2.64 In. (67 mm)
Displacement
38 Cu. In. (624 cc)
Construction
Cast Iron Sleeves,
Aluminum Crankcase
Electrical
12 Volt, 15 Amp Alternator Regulated Battery:
System
296 Cold Cranking Amps, 60 min. Reserve
Capacity, Industrial Rated Starter Motor
Ignition
Electronic Ignition
Governor
Internal Flyweight with external Adjustment
Air Cleaner
Dual Element
Lubrication
Full Pressure Lube with Oil Filter
Oil Capacity
2 Quarts (1.9 L)
Fuel Tank
Material: Non-Corrosive Polyethylene
Fuel Tank, Capacity: 3 Gallons (11.4 L)
Muffler
Quiet Compact, Low Back Pressure
DIMENSIONS
Overall Length
70 In.(178 cm)
Overall Width
36.9 In. (94 cm)
Height
To Top of Steering Wheel 39.7 In. (101 cm)
Wheel Base
50.7 In. (127 cm)
Weight (approx.)
w/o mower
689 lbs.
w/mower
956 lbs.
TRANSMISSION
Type
Hydrostatic Pump & Motor Air Cooled W/Fan
Pump
Variable Displacement Axial Type
Motor
Fixed Displacement Reversible Axial Type
Hydraulic Fluid
Simplicity Multi-Purpose Hydro Transmission Oil
Reservoir: 3 Qt. Capacity (2.8 L)
Filter: Cartridge w/25 Micron Rating
Full Flow w/o Anti-Drain Back
Control
Spring Dampened Single Lever
Free Wheeling Valve for Manual
Tractor Movement
Speeds
Forward: 0 - 7 MPH (0 - 11.3 km/h)
@3400 RPM
Reverse: 0 - 4 MPH ( 0 - 6.4 km/h)
Differential
Planetary Spur Gear, Controlled Traction Type
Final Drive
Hardened Spur Gears
Rolling Contact Bearings
CONTROLS
Steering
Full Circle Steering Wheel
4.14 to 1 Ratio, Gear and Sector
Clutch/Brake
Location Right Front; Clutch is soft action, V-belt
Clutch, Brake is external band type
Location
Implement Lift Lever: Left side (Hydraulic)
PTO Clutch Lever: Left side
Ground Speed Control Lever: Right Side
Ignition Key: On Dash
Light Switch: On Dash
Throttle Control: On Dash, Left Side
Choke Control: On Dash
Ammeter: On Dash
Parking Brake: Lower Right Side of Seat
CHASSIS
Frame
Channel Electrically Welded Heavy Gauge Steel
Power Take-Off Points: Front , Center & Rear
Engine Mounting Above Front Axle
Pivot Point Location: double Pivoting Heavy Duty
Cast Front Axle
Rear Wheels
Tire Size 23 x 10.5-12
Pneumatic Inflation Pressure 6-8 psi (41-55 kPa)
Front Wheels
Tire Size 16 x 6.50-8
Pneumatic Inflation Pressure 12-15 psi
(82-103 kPa)
Accessibility
Hood Tips Forward
Seat
Type Bucket, High Back, Adjustable w/
Spring Suspension
Turning Radius
Inside Rear Tire 32 In. (81 cm)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
