35
OPERATING THE SmarTerm 320 WITH A 2120
Use the following instructions to emulate a Remote Terminal on your PC.
1. At the DOS prompt
C:\>
type cd
st320
and press Enter. At the DOS prompt
C:\ST320>
type
ST320 -c
and press Enter.
•
Figure 62 appears
Figure 62
2. In Figure 62, select the
2120 TERMINAL MODE
and press the Enter key.
•
The Remote Terminal commands are now available on your PC.
Note: Hold down the
Alt
key and press
X
to Exit SmarTerm at any time.
1 – UNIVERSAL TRANSPONDER
2 – 2120 TERMINAL MODE
3 – 1200 Baud, 8/None
4 – 1200 Baud, 7/Even
5 – 2400 Baud, 8/None
6 – 2400 Baud, 7/Even
7 – 9600 Baud, 8/None
8 – 9600 Baud, 7/Even
♦
indicates Speed Connect
9600
1200
1200
1200
2400
2400
9600
9600
SmarTerm 320
Version
2.0a
(c) Copyright
1992
by
Persoft, Inc.
↵
: Make a connection using highlighted configuration
Alt-S : Setup up or examine highlighted configuration
↑
,
↓
, Home, End : Move bar cursor to highlight a configuration
Alt-X : Exit SmarTerm and return to DOS
Keyboard Usage
Select a configuration
