32
OPERATING THE SmarTerm 320 WITH A UNIVERSAL TRANSPONDER
Use the following instructions to display alarms, troubles, or supervisories on your PC. You will also be able to display
Alarm and Trouble Historical Logs as well as System Functions and Reports.
1. At the DOS prompt
C:\>
type
cd st320
and press Enter. At the DOS prompt
C:\ST320>
type
ST320 -c
and press Enter.
•
Figure 56 appears.
Figure 56
2. In Figure 56, select the UNIVERSAL TRANSPONDER and press the Enter key.
Note: Hold down the
Alt
key and press
X
to Exit SmarTerm at any time. To select an operation, type the number
of the operation and press Enter.
1 – UNIVERSAL TRANSPONDER
2 – 2120 TERMINAL MODE
3 – 1200 Baud, 8/None
4 – 1200 Baud, 7/Even
5 – 2400 Baud, 8/None
6 – 2400 Baud, 7/Even
7 – 9600 Baud, 8/None
8 – 9600 Baud, 7/Even
♦
indicates Speed Connect
9600
1200
1200
1200
2400
2400
9600
9600
SmarTerm 320
Version
2.0a
(c) Copyright
1992
by
Persoft, Inc.
↵
: Make a connection using highlighted configuration
Alt-S : Setup up or examine highlighted configuration
↑
,
↓
, Home, End : Move bar cursor to highlight a configuration
Alt-X : Exit SmarTerm and return to DOS
Keyboard Usage
Select a configuration
