10
4.
Press
<NEXT>
or
<PREVIOUS>
until
<CONFIGURE CARDS>
is
displayed and then press
<ENTER>
.
5.
Press
<NEXT>
or
<PREVIOUS>
until
<MODIFY 4010 CARD>
is
displayed and then press
<ENTER>
.
6.
Press
<NEXT>
or
<PREVIOUS>
until the display reads
<CARD TYPE=RS232 CARD>
and then press
<ENTER>
.
7.
Press
<NEXT>
or
<PREVIOUS>
to select either
<PORT A>
or
<PORT B>
and then press
<ENTER>
.
A display similar to the following appears, allowing you to set the
communication settings for the port.
8.
Use the arrow keys to move the bracket to the
[PORT]
Parameter. Use the
<NEXT>
and
<PREVIOUS>
keys to select a choice for this parameter.
Note that you must have an 80-column printer to print 4010 reports.
Choices are as follows:
•
PRT80U. Unsupervised, 80-column printer
•
Unused.
•
PRT40S. Supervised, 40-column printer
•
PRT40U. Unsupervised, 40-column printer
•
PRT80S. Supervised, 80-column printer
9.
Use the arrow keys to move the bracket to the
[BAUD]
Parameter. Use the
<NEXT>
and
<PREVIOUS>
keys to select a choice for this parameter.
Choices are as follows:
•
1200
•
2400
•
4800
•
9600
•
19200
•
38400
10. Use the arrow keys to move the bracket to the
[PARITY]
parameter. Use
the
<NEXT>
and
<PREVIOUS>
keys to select a choice for this parameter.
Choices are as follows:
•
None
•
Even
•
Odd
11. Press
<ENTER>
. A display similar to the following appears, allowing you
to select which events are routed to the printer
Continued on next page
4010 Front Panel Programming for an RS-232 Port,
Continued
Configuring RS-232 Port
Settings (continued)
<ENTER> to ACCEPT
<ARROW KEYS> to Change
Port[PRT80U] BAUD 9600 Parity None
Press <ENTER> to Send ALL Events to Port
Press <NEXT> to Select Events
