9
To program the function keys of a 2120 Multiplex for the Acknowledge (ACK),
Signal Silence (SIG SIL), and Detector Reset (DET RST) commands, follow the
steps below.
IMPORTANT: These configurations are for the 2120 Multiplex
function keys ONLY. The 2120 port MUST be set up
for Acknowledge (ACK).
To program the Acknowledge (ACK) command follow Steps 1 through 4.
Note:
Function
Key
<F7>
is the first available key for this operation.
<F7>
,
<F8>
, and
<F9>
are the standard function keys used for this procedure.
1. Press
the
<RETURN>
key to toggle the function keys represented on the
screen. Highlight the
<F7>
box on the screen.
2. Press
the
<DOWN ARROW>
key and move to
Text: field
.
3. Press and hold down the
<CTRL>
key and press the
<A>
key. This prompts a
display of á on the screen.
4. Press
the
<DOWN ARROW>
key and move to
Label: field
and type
ACK
.
To program the Signal Silence (SIG SIL) command follow Steps 5 through 8.
5. Press
the
<DOWN ARROW>
key and move to the
<F7>
box on the screen.
Press the
<RETURN>
key and highlight the
<F8>
box.
6. Press
the
<DOWN ARROW>
key and move to
Text: field
.
7. Press and hold down the
<CTRL>
key and press the
<S>
key. This prompts a
display of ù on the screen.
8. Press
the
<DOWN ARROW>
key to move to
Label: field
and type
SIG SIL
.
To program the Detector Reset command for the 2120 CRT/Keyboard follow
Steps 9 through 12.
9. Press
the
<DOWN ARROW>
key to move to the
<F8>
box on the screen.
Press the
<RETURN>
key to move to
<F9>
.
10. Press the
<DOWN ARROW>
key to move to
Text: field
.
11. Press and hold down the
<CTRL>
key and the
<D>
key. A display of ã
displays on the screen.
12. Press the
<DOWN ARROW>
key to move to
Label: field
and type
DET RST
.
After following the configuration steps above, save the configuration by pressing
<F14>
. The message
Save all? (Y/N)
appears on the upper right of the
screen. Press
<Y>
and then press the
<RETURN>
key.
Programming the 2120 Function Keys
Programming the 2120
Function Keys
firealarmresources.com
