6
Press the Setup Directory key
<F3>
to enter the terminal’s configuration mode.
Setup Directory <F3>:
For
<F1>
through
<F14>
select menus, use arrow
keys to select field. Press the
Return
key to change parameter.
Quick Setup <F1>
Command Specification
Emulation
VT300/7
EIA Baud Rate
9600*
EIA Data Format
8/1/E*
Enhanced
ON
AUX Baud Rate
9600*
AUX Data Format
8/1/E*
Comm Mode
Full Duplex
Language
U.S.
Sessions One
Host/Printer EIA/AUX
General Setup <F2>
Command Specification
Emulation
VT300/7
Enhanced
ON
Auto Wrap
OFF
Auto Font Load
ON
Auto Page
OFF
Curs Dir
Left to Right
Auto Scroll
ON
Monitor Mode
OFF
Screen Saver
OFF
Bell Volume
06
Warning Bell
ON
Bell Length
350 ms
Setup Language
U.S.
Sessions
One
Display Setup <F3>
Command Specification
Display Cursor
ON
Cursor
Blink Block
Auto Adjust Cursor
ON
Page Length
25
Screen Length
26 lines
Screen Video
Normal
Columns 80
Scroll Jump
Overscan Borders
ON
Width Change Clear
OFF
Speed Fast
Refresh Rate
71 Hz
Keyboard Setup <F4>
Command Specification
Language
U.S.
Char Set
National
Key Mode
ASCII
Key Click
ON
Key Repeat
OFF
Key Rate
20 cps
Margin Bell
OFF
Key Lock
Caps
Caps Lock
Toggle
Num Lock
Toggle
*4100+/4120 values are shown. The 2120 values are as follows: Baud rate = 1200, Data/Parity bits = 8/1None, Parity Check = OFF.
Note:
4010 and 4020 values typically match 4100+/4120 values, but the 4010’s parity setting is NONE.
Continued on next page
Terminal Configurations
Configuring the Terminal
for 2120, 4010, 4020, and
4100+/4120 Systems
firealarmresources.com
