Simplex 4100ES-S1, Programming Manual

Page: 34 / 118

4100ES-S1 Programming Guide Document: LT0400
Addressable Device Settings
6-4
6.3.3 4090-9002 Relay IAM
Device Type
RIAM
– Standard Setting
Point Type
RELAY
– General Purpose relay.
TRELAY
– Fault Relay on until fault cleared
6.3.4 4090-9007 Signal ZAM
Device Type
SIGIAM
– Signal IAM - IDNet
Point Type
RELAY
– General Purpose Supervised relay (under Custom Control).
SIGNAL
– Alarm Relay on until Alarm is cleared
6.3.5 4090-9101 Monitor ZAM
Device Type
MBZAM
– Standard Setting
Point Type
FIRE
– Standard setting
6.3.6 4190-9050 4-20mA Analog Monitor ZAM
Device Type
ANAMON
– Standard Setting
Point Type
The Point Types are custom configurable using the AMON Pt Type Tab. The Point
types need to be configured before the 4190-9050 is added.
6.3.7 4090-9118 Relay IAM with T-Sense Input
This device has multiple sub points. The sub points can have the point type changed depending on
the operation.
Mx-x-0 Parent Point
Device Type
TRIAM
– Standard setting
Point Type
UTILITY
– Standard setting
Mx-x-1 1
st
Sub Point (relay output)
Device Type
MRELAY
– Fixed Device type
Point Type
RELAY
– General Purpose relay
TRELAY
– Fault Relay on until fault cleared