Simplex 4098-9685, Installation Instructions Manual

Page: 19 / 36

13
UL-LISTED
CONTROL PANEL
SIMPLEX 2120,
4001, 4002, 4004, 4005,
4020, 4100+ OR 4120
INITIATING
DEVICE
CIRCUIT
BACKUP 2
EOL RESISTOR
(IF USED, SEE NOTE 1)
PRIMARY 1
SEE NOTES 2, 3
4098-9688
2-WIRE DETECTOR WITH RELAY
1
TB1
2 3 4 5 6 7 8
+ Z
IN OUT
LED
+ -
RELAY
+ -
TEST - Z
9 10
4098-9841
REMOTE RELAY
BLK
BLK
RED
VIO
BLU
GRY
YEL
ORN
GRN
N/C
C
N/O
N/C
C
N/O
+
-
+
-
SEE
NOTES
4, 5
SEE
NOTE 6
SEE NOTE 6
4098-9834
REMOTE ALARM
INDICATOR /
KEYSWITCH
OPTIONAL 4098-9830
WIRED THE SAME AS
4098-9834 LESS
"TEST" CONNECTION
OPTIONAL
(SEE ACCESSORIES)
RED
ALARM
LED
TEST
RED BLK
Figure 7. 4098-9688 Two-Wire Duct Detector DC Operation with Remote Relay Control
Continued on next page
Notes:
1. For Style D initiating device circuit, wire per dotted lines and do not use EOL resistor. If Style B
initiating circuit, refer to drawings provided with the system panel for proper EOL resistor value.
2. It is recommended that the primary 1 and backup 2 lines be in separate wire runs and in compliance wit
local requirements.
3. Duct Detector wiring is 12 to 18 AWG. For additional wiring information, refer to wiring diagrams
supplied with the system panel.
4. The 4098-9834 or 4098-9830 are polarized; observe color coded wiring.
5. Maximum wire length to test terminals and remote LED is 250 feet.
6. 4098-9841 Remote Relay contacts are rated at 1 amp at 28VDC/0.5 amp at 125VAC, resistive, non-
power limited. Wiring from the relay to the device it is controlling should be no more
than 3 feet (per
NFPA 72).
Technical Manuals Online! - http://www.tech-man.com