SimpleTech SimpleShare User Manual Download Page 107

Page: 107 / 120

Managing SimpleShare

Disk Pool

Encrypted Pool Names

, enter the password for the

encrypted pool.

Click

Mount Pools

In the confirmation dialog, click

If an incorrect password was supplied SimpleShare will

provide a notification that it was unable to mount the pools

and list which pools had an incorrect password supplied. If

multiple encrypted pools were listed in the Encrypted Pool

Names controls only those that had passwords will be listed

in the error notification. Encrypted pools that valid

passwords were supplied for will be unlocked. SimpleShare

will return to the Encrypted Pool Authentication page with

the Encrypted Pool Names controls updated to reflect those

pools that remain locked, i.e., had incorrect passwords

supplied.

Summary of Contents for SimpleShare

























































































































Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands

SimpleTech SimpleShare, User Manual

Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands