3.1.
Tuningmode
The tuning mode is activated as soon as the sIMPLEk-Stick is inserted. The actually travelled speed remains
readable during the tuning-mode. Up to 20.0
(
ℎ)
, the speed is output 1: 1. Above 20.0
(mph),
the speed will be displayed over the second number and decimal place. Examples:
21.5
→
15
22.5
→
25
24.5
→
45
In order to balance the difference between the actual forward speed and the route displayed on the
speedometer, the maximally driven speed will be displayed on the speedometer after one minute whilst
standstill until the route will be caught up. As soon as the difference will be balanced, the speedometer
displays 0.0
(mph) again and the E-Bike switches off itself independently. If the E-Bike will be switched
off in advance, sIMPLEk-Stick stores the difference with an accuracy of 200m and catches up the route
later on. Thus the maximal speed as well as the actually travelled route/total distance will be reproduced
correctly.
Resetting of the maximal speed
The maximal speed displayed to compensate for the difference in the distance traveled will be resetted
by plugging the sIMPLEk-Stick into any active USB port for at least 5 seconds. The next time the sIMPLEk-
Stick is plugged in, a new calibration is required, which starts automatically.
