1.
General remarks and safety instructions
Note for StVo or use on public roads
The sIMPLEk Pro Tuningmodule, obstructed in a compatible E-Bike, causes the suspension of the
factory-integrated speed regarding the support of the motor.
Thus, the use of the sIMPLEk Pro Tuningmodule, within the scope of the StVO or on public roads, is
forbidden and not accepted.
The use of the sIMPLEk Pro Tuningmodule is only provided for closed-off public traffics as well as for
private grounds and race courses.
The sIMPLEk-Stick Pro is compatible with the following E-Bike engines:
•
Bosch (Classic Line, Active Line (Plus), Performance Line, Performance Line (CX))
•
Yamaha (PW, PW-SE, PW-X, GIANT SyncDrive)
•
Brose
Please note that the technical characteristics of your e-bike may not be designed for the use of tuning
measures without further technical adjustments. The use leads to the warranty loss of the e-bike. If the
e-bike concerned has an operating license, it will be extinguished.
Please put on a suitable helmet at all times!
The usage of the assembly set leads to the loss of warranty concerning the vehicle.
Regarding the installation of the E-Bike, please make sure not to damage any cables while installing the
protection cover of the motor. Thus, you can prevent electrical shorts which could lead to major cable
bruises or fires.
Liabilities for any damages will not be assumed (directly or indirectly) that may arise by activating the
completed assembly set.
Use at your own risk!
2.
Installation
Before you start with the installation, remove the battery of your E-bikes!
The connection cable is upstreamed in front of the original sensor. For this purpose the motor cover has
to be removed. Depending on the engine version you need additional tools.
