SL-863 MHL AVLink/CBUS Analyzer 3.0
User Guide
6
© 2014 Simplay Labs, LLC. All rights reserved
Simplay-UG-1006-A
CONFIDENTIAL
2.
Installation
This section explains how to set up the SL-863 testing facility.
2.1.
Package Contents
The Simplay Labs MHL 3 Protocol Analyzer package contains the following components:
MHL 3.0 AVLink/CBUS Analyzer module, SL-863.
MHL 3 Cable
Source/Sink test fixtures, SL863PB
The SL-863 software, including its drivers and RTL update (if applicable), can be downloaded from Simplay Labs website
(
http://www.simplaylabs.com/support/product_support.aspx
).
2.2.
System Requirements
The application for SL-863 can only be operated on a Simplay Labs UTS-800 test platform, running Microsoft Windows 7
64-bit operating system.
2.3.
Driver Installation
Follow these steps to install the driver on UTS-800. This installation only needs to be done once.
1.
Open the Device Manager on the Test Control Unit. If the driver is not previously installed on the TCU, you can find
the device named “PCI Memory Controller” in “Other devices” (
).
Figure 2.1. Device Manager
2.
Right click “PCI Memory Controller”, and select the “Update Driver Software…” menu item (as shown in
).
