SL-863 MHL AVLink/CBUS Analyzer 3.0
User Guide
16
© 2014 Simplay Labs, LLC. All rights reserved
Simplay-UG-1006-A
CONFIDENTIAL
4.
Test Connection and Setup
4.1.
Source DUT Test Connection
In an MHL Source DUT test, as show in
, DUT needs to be connected to the MHL IN port of the SL-863
analyzer using an MHL 3 cable. A display, usually a TV with HDMI port, needs to be connected to the Monitor port
through an HDMI cable.
4.1.1.
eCBUS Startup Specific
When testing eCBUS start-up state machine test (MHL 3 CTS Test ID 6.4.7.1), a test fixture SL863PB1 is needed for this
test case. The fixture needs to be connected between the DUT and the MHL IN port of the SL-863 analyzer.
SL863PB1
A/V Display
SOURCE
DUT
HDMI Cable
MHL Cable
Figure 4.1. Connection for Source DUT Test
