SL-863 MHL AVLink/CBUS Analyzer 3.0
User Guide
18
© 2014 Simplay Labs, LLC. All rights reserved
Simplay-UG-1006-A
CONFIDENTIAL
4.3.
Dongle DUT Test Connection
In MHL Dongle DUT test, as shown in
, the MHL male connector of DUT should be connected to the MHL OUT
port of the SL-863 analyzer. The HDMI port of DUT should be connected to a display through an HDMI cable. Another
display should be connected to the Monitor port through an HDMI cable.
A test fixture SL863PB2 is needed for all the test cases. The fixture needs to be connected between DUT and the MHL
OUT port of the SL-863 analyzer (as shown in
).
A/V Display
HDMI Cable
A/V Display
SL863PB2
Dongle DUT
HDMI Cable
Figure 4.3. Connection for Dongle DUT Test
4.4.
Test Method and Procedure
For detailed test method and procedure, refer to the Main Required Methods section and the Simplay MOI section of
the MHL Compliance Test Specification.
