Installation and Setup Guide
4.4 Unpacking and Inspection
Each SimplBox is completely assembled and tested at the factory prior to shipping. Various events
may happen during transport that could damage the system. Inspect the system and packaging
thoroughly for any damage to the system. If there is damage to the SimplBox housing, connectors,
or visible corrosion, leaking, etc. do not install the unit and contact Simpl Global for instructions.
4.3 Tools and Hardware Required
In addition to solar panels, solar racking, microinverters and its associated hardware, you will
need to provide the following:
●
Electrical multi-meter / voltage tester
●
Sockets, wrenches for mounting hardware
●
Torque wrench
●
MC4 Removal tool
●
(2) Microinverter mounting bolts per SimplBox
Page 18
