using a battery replacement card and an authorised ID medium (to
open the door + replace the batteries). Once the batteries are replaced,
the SI-Locking Cylinder needs to read the battery replacement card
again.
You need to add/programme a valid card associated with the locking
system concerned. This is a special card which eliminates 'Freeze mode' on
the locking device. An authorised ID medium is always required when you
wish to open the door and replace the battery. You need to have
programmed this special card with the
T-ID 7
. T-ID 7 is a special system ID,
which the system integrator must create.
SmartIntego
Locking cylinder
(Manual)
8. Battery warnings
28 / 44
