5 Installation
ü
Two suitable screws (Ø 4 mm, for example flat or round head
screws)
ü
SmartRelay 2 programmed
ü
SmartRelay 2 disconnected from power supply
1.
Attach the base plate of the SmartRelay 2 to the desired location
(you can use the base plate as a drilling template).
2. Connect all additional components.
3. Feed the power supply cable through the recess provided for this
purpose.
IMPORTANT
Danger of short circuit due to missing seal
The cable entry of the WP version of the SmartRelay 2 is not sealed.
Water can enter.
Seal the cable entry yourself with a suitable sealant (e.g. vinegar-
free cross-linking silicone).
4. Connect the power supply.
5. Actuate an identification medium to test the function.
9
You have installed the SmartRelay 2.
SmartRelais 2
5. Installation
32 / 128
EN
