Replacement transponders can overwrite their corresponding original
transponders. The original transponder is blocked once the replacement
transponder is used for the first time.
Flip-flop
Pulse mode (default setting) is switched off and the pulse duration no
longer plays a role. When flip flop mode is activated, SmartRelay
changes its status from on to off or vice versa each time it is activated
using a transponder. This mode is ideal for switching lights, machines
and other systems on and off.
Where applicable, you should ensure that mains adapters and electric
strikes are suitable for continuous current operation in such an
installation.
Repeater
The SmartRelay receives a transponder signal, which it amplifies and
forwards. This function allows SmartRelay to be used to bridge longer
radio transmission paths. The distance to the next SmartRelay can be
up to 2 m.
Time switch-over function
For SREL.ZK and SREL.ADV only. A time zone plan needs to be
uploaded when the time switch-over is activated. This allows
SmartRelay to remain unlocked during the indicated times (in Group 5).
During the day, the door can be used freely while only a transponder will
open the door at night.
You should ensure that mains adapters and electric strikes are suitable
for continuous current operation in such an installation
OMRON
For SREL.ADV only Many access control and time-and-attendance
systems feature serial interfaces to connect card readers. A SmartRelay
can also be connected via these interfaces, thus also allowing you to
use SimonsVoss transponders in third-party systems.
Select this option on both the SmartRelay and the cylinder if you wish
the SmartRelay to transmit transponder data to a third-party system
and a remote opening command to be sent from SmartRelay to a
cylinder after clearance by the third-party system.
Set the type of external system under 'Interfaces'. Click on the
"Extended configuration" button to do so.
Some settings can be specified using the "Extended configuration" button:
Pulse length
SREL1+2
(Manual)
6. Configurations in the software
25 / 38
