Page 29
SRP9180 - Trunked Portable Radio User Guide
BEFORE USE
Before operating the Radio: Ensure that a fully charged battery is fitted to the radio. Ensure that the antenna is firmly
secured.
To remove battery:
Slide Latch (1) and lift out (2) To fit battery: Seat lower end (2) and push battery top in
SWITCH ON THE RADIO
Turn the rotary volume control until it clicks. A welcome message is displayed and the top LED illuminates green for 2
seconds - adjust the volume control to about mid position.
PROBLEMS AND HINTS
The SRP9180 Radio is a high quality reliable product. In the unlikely event of a problem, please check the following points
before contacting your supplier: If the Radio fails to work, check that the battery is charged and correctly fitted and that the
radio is switched on. If the radio does not receive or send calls, check that the antenna is correctly fitted and the volume
is turned up. Check that there is sufficient signal strength at your position using the signal strength indicator on the LCD
display, if not move to an area where the signal strength is adequate. If the Radio displays an error message at switch on,
please refer to your supplier.
CARE OF YOUR RADIO
To keep your Radio clean use a slightly DAMP soft cloth for all exterior surfaces - DO NOT use chemical, aerosol
or abrasive cleaners. To ensure efficient operation, the battery contacts should be periodically cleaned with a soft damp cloth.
Batteries must be disposed of in accordance with you local Health & Safety Regulations. Do NOT incinerate or dispose of as
normal waste.