TP0332/2
F.1
SRP8000 SERIES VHF/UHF PORTABLE RADIO
APPENDIX F - PROGRAMMING LEAD
Figure F.1 Programming Lead
INTRODUCTION
The SRP8000 series portable radios are programmed via a PC serial port. A connecting cable
(programming lead) is required. The PC end terminates in a 9-pin ‘D’ Type female connector and the radio
end terminates in a 3,5mm and a 2,5mm stereo jack housed in a common moulding.
The lead is not screened and, as a result, it is unlikely to operate successfully when the radio is
transmitting.
Terminology
In the following text, jack connections are defined as follows:
SPECIFICATION
Mechanical
Length
:
1,5m.
Connectors
:
9-way ‘D’ Type, female, straight.
3,5mm stereo jack ) housed in
2,5mm stereo jack ) common moulding.
Environmental
Storage Temperature
:
–40° to +80° C.
Operational Temperature
:
20° to 55° C.
Sleeve
Ring
Tip
Summary of Contents for SRP8000 SERIES
