SDP650 – USER MANUAL
TNM-U-E-0115
Jun 15 (Iss. 1.4)
Page 20
GETTING STARTED
2.1.4
Fitting the Belt Clip
Align the belt clip with the grooves of the belt clip housing on the back of the battery. Push the belt
clip downwards until a click is heard.
Figure 3. Fitting the Belt Clip.
2.1.5
Fitting Audio Accessory/Programming Cable
1
On the side of the radio, release the retaining screw and remove the accessory socket cover.
2
On the audio accessory/programming cable, locate the tab lug of the connector into either
the top or bottom tab hole on the side of the radio as required (see
Figure 4
below).
3
Tighten the screw to secure the audio accessory/programming cable to the radio.
Figure 4. Fitting Audio Accessory/Programming Cable.
2.2
C
ONFIGURATION
Before the SDP650 radio can be used it must be configured using the FPP. The configuration
process loads the customised channels, signalling and user options so that the radio will operate
with the user’s system.
Tab
Lug
Top
Tab
Hole
