SDP650 – USER MANUAL
TNM-U-E-0115
Jun 15 (Iss. 1.4)
Page 23
FUNCTIONS
4
FUNCTIONS AND FACILITIES
D
ISPLAY
The display shows text information relevant to the selected Menu Screen.
Figure 6. Default screen.
The
Name
field (e.g. C1s1) shows the selected entry from the current screen (e.g. from the
Channel List).
The F1 button is used to access the available Menu options. Where menu selection is not
required, this button can be reprogrammed to perform other functions in this screen.
The Nav Up (
▲) and Nav Down (▼) buttons scroll up and down through the available selections
within a Menu Screen.
The F1, F2, F3 and F4 buttons are programmable function buttons, in this screen.
4.1
S
WITCH
O
N
/S
WITCH
O
FF
Press and hold down the On/Off button for approximately 2 seconds to switch the radio ON.
The display will illuminate and briefly show an “Opening Message” (arranged by your dealer) and
the Selcall Identity of the radio (if used).
After a brief time the display will show the selected channel (see
Figure 7
below), at which time the
radio is ready for use.
Figure 7. Typical display sequence after Switch On.
Pressing and holding the On/Off button for approximately 2 seconds will switch the radio Off.
If the radio Inactivity Timer is enabled, the radio will automatically turn off after several hours of
inactivity (i.e. no buttons pressed). The radio will emit warning beeps for 10 seconds prior to
switching off. Pressing any button will reset this timer.
The radio can also be set up to switch on automatically with the Vehicle Ignition whenever the
vehicle is started.
4.2
A
DJUSTING THE
V
OLUME
After turning the radio on, to adjust the volume, rotate the volume control knob clockwise to
increase it or counter-clockwise to decrease it.
C1s 1
C1s 1
