9
www.simmonsdrums.net
panel controls
4
DA350
ELECTRONIC DRUM MONITOR SYSTEM
5
1
7
6
8
3
2
1
Monitor Out Level
Each channel has separate monitor output level controls to manage monitor signals to each out.
2
Balance
This allows you to adjust the stereo balance of the speaker system.
3
Power LED
The Power LED is green to indicate that the DA350’s power cable is connected to an
electrical outlet, and the Power Switch is turned on.
4
EQ Controls
The LOW EQ will p/- 15dB of boost or cut below 100Hz. Turn the LOW EQ
up to add bass or warmth to the speaker. The HIGH EQ will p/- 15dB of boost
or cut above 10kHz. Turn the HIGH EQ up to increase the volume of cymbals or other
high frequency sounds.
5
Channel Volume Controls
Each channel has separate volume controls to allow discrete mixing of each audio source.
6
Aux/Bluetooth Selector Switch and Pair button
This changes the Channel 3 input to Bluetooth from the physical inputs.
See
10
Bluetooth Controls
for details
7
Subwoofer Volume
This controls the Subwoofer volume. The “Flat” indication on the markings around the
knob indicates that the system-wide balance between the high and low frequencies are
equal. If you want more low frequencies turn the knob towards the Max indicator.
8
Setup Switch
Sets the system into either a mono or stereo speaker configuration.
