10
DA350
Electronic Drum Monitor System
OWNER’S MANUAL
panel controls
10
11
9
9
Channel Inputs
Channels 1 and 2 are intended for line level inputs from products such as
drum modules.
Channel 3 can either be a physical input source that comes into the RCA
inputs or the 1/8” TRS input or you can switch it to Bluetooth® for wireless
connectivity.
10
Bluetooth Controls
To use a Bluetooth-enabled device like your phone or computer as the
source for Input 3, you must first “pair” it with your DA350.
• Power on your DA350, and enable Bluetooth on your source device
(phone, computer or other mobile device).
• From your source device, display its list of discovered Bluetooth devices,
and look for “Simmons DA350” there. If you don’t see it, try scrolling
the list to make sure it’s not hidden off-screen. If it’s not listed, push and
release the PAIR/play/pause button on your DA350.
• Once you do see “Simmons DA350” on the list, select it, and your source
device and your DA350 will pair, while the DA350 plays a chime and
lights the Bluetooth LED blue.
• Play audio from your Bluetooth source device, and you’ll now hear it via
INPUT 3 of your DA350, as the Bluetooth LED slowly flashes.
• Pressing the PAIR/play/pause button will now remotely control the play/
pause action of your device, with the Bluetooth LED flashing during play,
and solid while paused.
• To “disconnect” your Bluetooth device from Input 3, press and hold the
PAIR/play/pause button. The LED will turn off and you will hear a chime.
• When you power on your DA350, it will look for any previously paired
device, and pair with it automatically if available.
11
Monitor Outputs
Use to connect the DA350 to a Mixer or PA system.