8
DA350
Electronic Drum Monitor System
OWNER’S MANUAL
Setting up the System
1. You will need to place the flat sections with the pole receptacle
onto the top of the speaker pole.
2. Extend the speaker stand legs and place each stand on either
side of your electronic drum set.
3. Once the stands are set up slide the small speakers onto the
speaker stands.
4. Connect the included 1/4” to 1/4” speaker cables to the
speaker outputs on the bottom section of the sub speaker/mixer
cabinet.
5. Plug the audio outputs of your drum module into the two 1/4”
input channels on the mixer.
6. Plug the power cable into the AC jack on your sub speaker/
mixer cabinet and plug the other end of the cable into your
power mains.
7. Turn on the power of the sub speaker/mixer. Slowly increase the
level on the channel you’ve connected.
8. Turn the sub knob up to the desired level to set the low frequency
response for the entire system.
2.
3.
