SLFL Instructions – LED Sports Light
Simkar Lighting
700 Ramona Ave, Philadelphia, PA 215-831-7700
www.simkar.com
70-62938
5
Glare Shield
Note: Always install facing forward.
Aiming:
1. Loosen, do not remove, the large yoke bolts that
attach the yoke to the cross arm, adjust the fixture
left or right to the desired design plan. Use the
degree dial on the bottom of the yoke mounting
plate. Note: The degree markings on the aiming
label should only be used as an estimate.
2. After aiming your fixture secure the large yoke
bolts to the cross arm.
3. To adjust your vertical plane to the field loosen
the left and right socket bolt as shown. Aim the
fixture with the desired tilt towards the field use
the degree dial located on the side of the fixture
as a guide. Tighten the sockets after the desired
design plan is determined.
Adjust the angle, and tighten screws
