13
2.3. Throttle
To get stiffer pedal you can:
●
Adjust the pushrod top connection to a higher position (4 different positions)
●
Add preload by adding washers on the rod assembly, next to the spring (locations shown on the below picture)
To get softer pedal you can:
●
Adjust the pushrod top connection to a lower position
●
remove preload by removing washers from the rod assembly
Maximum allowed amount of preload is achieved with one washer on each side of the spring. Do not add more preload to the throttle.
The pedal is shipped with maximum preload configuration.
You can remove one or both of the washers to get less preload.
Summary of Contents for THERA PEDALS
Page 1: ...Manual v 1 4...
