15
3.2. Layout
Purple = Horizontal lines for adjusting the dead zones. After
any mechanical changes on a pedal, you need to adjust these
lines for that particular pedal to match the mechanical settings,
and to get your dead zones right. The only exception to this is
the brake max. force - this only needs to be adjusted if you
want to change the actual max. needed braking force for 100%
brake input.
Red = Toggle switch for activating / deactivating the clutch.
●
Calibration on the app is done, when you have put the
sliders for every pedal where you want them.
●
Filters are for smoothing out the signal (EMI issues etc.)
●
Profile saving from the top left corner.
●
Adjusting the brake needed maximum force level is done
moving the top line on the sensor bar (green).
Summary of Contents for THERA PEDALS
Page 1: ...Manual v 1 4...
