User manual - METER SWE-N55L
2.
GENERAL CHARACTERISTICS
is a simple digital wall-mounted indicator, equipped with one
measurement input (current input, 4-20mA) used simultaneously as device power supply input.
Current input has additionally overcurrent protection circuit, which protects standard resistor.
allows user to select a conversion characteristic of several kinds: linear,
square, square root, and user defined (max.20 points length). Result is showed on 4-digit LED
display. Displayed values range can be selected by user, from -999 to 9999, plus decimal
point.
can be equipped with bistable relay output. The device can be
configured via IR remote controller.
IR remote controller is not a part of the
and must be ordered separately.
3.
TECHNICAL DATA
Minimal supply current
3.5 mA, device supplied from current loop
Measurement loop voltage drop
max. 7 V
Current input
4÷20 mA overload protected,
maximum input current about 50 mA
Current measurement accuracy
± 0,1% @ 25°C; ± one digit
Temperature stability
50 ppm / °C
Display range
-999 ÷ 9999, plus decimal point
Accepted prolonged input overload 20%
Relay output
bistable 0.5A/30V AC (cos
ϕ
= 1), min. switching delay:
about 4 sec.
Display
LED, 4 digit, 13mm height, red
Data memory
non-volatile memory, EEPROM type
Protection level
IP 65
Housing type
Housing material
Housing dimensions
without glands
:
with glands:
wall mounted
ABS +
fibreglass
64 x 58 x 36 mm
64 x 82 x 36 mm
Operating temperature
(depending on version)
0°C to +50°C
or -20°C to +50°C
Storage temperature
(depending on version)
-10°C to +70°C
or -20°C to +70°C
Fastening
to wall, 2 M3 bolts
4
Summary of Contents for SWE-N55L
Page 30: ...User manual METER SWE N55L 30...
Page 31: ...User manual METER SWE N55L 31...
