User manual - METER SWE-73-L
Figure 6.1. Definitions of measurement ranges in mode 4 ÷ 20mA
If the result of measurement exceeds the
permissible measurement range
, warning
“-Hi-”
or
“-Lo-”
is displayed rather than input signal,
depends on exceeded value (see
description of
“Lo r”
i
“Hi r”
parameters, paragraph
“
inPt” menu
).
If the measurement value do not exceeds
permissible measurement range
, but
displayed value exceeds range -999 ÷ 9999, the warning
“-Ov-”
is displayed rather
than the calculated result.
Range of displaying values, characteristic of conversion, decimal point position and
measure filtering ratio, are user configurable parameters. All accessible parameters can be
changed by entering the menu (see:
DEVICE PROGRAMMING
). Use the remote controller to
do it.
Configuration of the device via menu
do not stops measures
.
12
i
“Lo r”
parameter
“Hi r”
parameter
4 mA
20 mA
permissible measurement range
nominal measurement range
i
