Simex SRT-73, User Manual

Page: 24 / 40

User manual - METER SRT-73
FiLt
- this parameter sets filtration rate. It can be set to values from 0 (no filtration ) to 5
(strongest filtration time window about 2 sec).
toFS
- offset (expressed in 0.1°C, range ± 9.9°C.). This parameter allows shifting of
measurement scale, and express value added to calculated (measured) result.
7.3.3. bri parameter
This parameter allows user to set bright of the LED display, bright can be set to
conventional values from 1 to 8.
7.3.4. CoL menu
This menu contains settings related to signalisation via display colour. This kind of
signalisation consist in change of display colour (from basic colour to active colour) in defined
situations, for example after change of R1 state.
SCoL - basic colour ( the second one becomes active colour):
grEE
- main colour is green,
rEd
- main colour is red.
C r1 , C r2
- control the display colour according to relay (R1, R2 separate )state :
oFF - control for particular relay is off,
on - control for selected relay is on, the display will change its colour after
selected relay becomes active.
C AL
- control the display colour according to alarm situations :
oFF - control is off,
on
- control is on, the display will change its colour after alarm situation occurs.
C Pr - this setting enables additional threshold for display colour controlling, detailed
conditions of this control are defined by
dir
,
SEtP
and
HySt
parameters of
CoL
submenu.
oFF
- no additional threshold.
on - additional threshold enabled, the display will change its colour after result
satisfy conditions defined by
dir , SEtP and HySt parameters of CoL
submenu.
dir
- this parameter defines the direction of result changes activating change of display
colour:
morE - display will change its colour after the result is higher than
thrhysteresis
24