Simex SRT-147, User Manual

Page: 39 / 48

User manual - METER SRT-147
Register Write Range Register description
3Ah Yes 0 ÷ 5
“ modE ” parameter in “ rEL2 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
3Bh Yes 0 ÷ 999
“t on” parameter in “rEL2” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 3Dh)
3Ch Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 3Dh)
3Dh Yes 0 ÷ 1
“unit” parameter in “rEL2” menu:
0
- seconds;
1
- minutes
3Eh Yes 0 ÷ 2 “AL” parameter in “rEL2” menu: 0 - no changes; 1 - on; 2 - off
3Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included
40h Yes -999 ÷ 9999 “ SEtP
” parameter in “
rEL3
” menu, no decimal point included
41h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL3 ” menu, no decimal point included
42h Yes 0 ÷ 5
“ modE ” parameter in “ rEL3 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
43h Yes 0 ÷ 999
“t on” parameter in “rEL3” menu, expressed in tenth of seconds or
tenth of minutes depend on
“unit”
parameter - register no. 45h)
44h Yes 0 ÷ 999
“toFF” parameter in “rEL3” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 45h)
45h Yes 0 ÷ 1
“unit” parameter in “rEL3” menu:
0 - seconds; 1 - minutes
46h Yes 0 ÷ 2
“AL” parameter in “rEL3” menu: 0 - no changes; 1 - on; 2 - off
47h Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL3 ” menu, no decimal point included
48h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL4 ” menu, no decimal point included
49h Yes -999 ÷ 999
“ HySt ” parameter in “ rEL4 ” menu, no decimal point included
4Ah Yes 0 ÷ 5
“ modE ” parameter in “ rEL4 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
4Bh Yes 0 ÷ 999
“t on”
parameter in
“rEL4”
menu, expressed in tenth of seconds or
tenth of minutes depend on
“unit”
parameter - register no. 4Dh)
4Ch Yes 0 ÷ 999
“toFF” parameter in “rEL4” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 4Dh)
4Dh Yes 0 ÷ 1
“unit” parameter in “rEL4” menu:
0 - seconds; 1 - minutes
4Eh Yes 0 ÷ 2
“AL” parameter in “rEL4” menu: 0 - no changes; 1 - on; 2 - off
4Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL4 ” menu, no decimal point included
50h Yes 0 ÷ 1
“ modE ” parameter in “ HOLd ” menu (type of detected changes):
0 - peaks; 1 - drops
39