Simex SRP-73-XC, User Manual

Page: 40 / 48

User manual - METER SRP-73-XC
Register Write Range Register description
24h Yes see descr.
Parameters of “ SECU ” menu (binary format (0 - „ oFF ”, 1 - „ on ”):
bit 0 - “ A r1 ” parameter; bit 1 - “ A r2 ” parameter
bit 2 - “ A r3 ” parameter; bit 3 - “ A r4 ” parameter
25h Yes 0 ÷ 5
“rESP” parameter in “rS” menu (additional response delay);
0 - no additional delay; 1 - ” 10c ” option; 2 - ” 20c ” option;
3 - ” 50c ” option; 4 - ” 100c ” option; 5 - ” 200c ” option;
27h Yes 0 ÷ 99
“mbtO” parameter in “rS” menu (maximum delay between
received frames); 0 - no delay checking;
1 ÷ 99 - maximum delay expressed in seconds
2Dh Yes 1 ÷ 8
“ bri ” parameter (display brightness);
1
- the lowest brightness;
8
- the highest brightness
2Eh Yes 0 ÷ 1
“SCoL” parameter in “CoL” menu (main colour of display);
0 - green; 1 - red
2Fh Yes 0 ÷ 1
“ Edit ” parameter (numerical parameters edit mode);
0 - „ dig ” mode; 1 - „ SLid ” mode
30h Yes -999 ÷ 9999 “
SEtP ” parameter in “ rEL1 ” menu, no decimal point included
31h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL1 ” menu, no decimal point included
32h Yes 0 ÷ 5
“ modE ” parameter in “ rEL1 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
33h Yes 0 ÷ 999
“t on” parameter in “rEL1” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 35h)
34h Yes 0 ÷ 999
“toFF” parameter in “rEL1” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 35h)
35h Yes 0 ÷ 1
“unit”
parameter in
“rEL1”
menu:
0 - seconds; 1 - minutes
36h Yes 0 ÷ 2 “AL” parameter in “rEL1” menu: 0 - no changes; 1 - on; 2 - off
37h Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL1 ” menu, no decimal point included
38h Yes -999 ÷ 9999 “ SEtP
” parameter in “
rEL2
” menu, no decimal point included
39h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL2 ” menu, no decimal point included
3Ah Yes 0 ÷ 5
“ modE ” parameter in “ rEL2 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
3Bh Yes 0 ÷ 999
“t on”
parameter in
“rEL2”
menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 3Dh)
3Ch Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 3Dh)
3Dh Yes 0 ÷ 1
“unit” parameter in “rEL2” menu:
0 - seconds; 1 - minutes
3Eh Yes 0 ÷ 2 “AL” parameter in “rEL2” menu: 0 - no changes; 1 - on; 2 - off
3Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included
40