User manual - METER SRL-49
- Check the connections are wired correctly prior to switching the unit on.
In order to install the unit, a 43 x 90.5 mm mounting hole (Figure 4.1) must be
prepared. The thickness of the material of which the panel is made must not exceed
5mm. When preparing the mounting hole take the grooves for catches located on
both sides of the housing into consideration (Figure 4.1). Place the unit in the
mounting hole inserting it from the front side of the panel, and then fix it using the
brackets (Figure 4.2). The minimum distances between the centre points of multiple
units - due to the thermal and mechanical conditions of operation - are 67 mm x
115 mm (Figure 4.3).
a)
7
!
!
43 mm
8 mm
13 mm
8 mm
13 mm
9
0,
5
m
m
1
m
m
1
m
m
max. 5 mm
Summary of Contents for SRL-49
Page 60: ...User manual METER SRL 49 60...
Page 61: ...User manual METER SRL 49 61...
