User manual - MODULE SIN-8
-
Do not attempt to disassemble, repair or modify the unit yourself. The unit
has no user serviceable parts. Defective units must be disconnected and
submitted for repairs at an authorized service centre.
The unit is designed for operation in an industrial environment and must
not be used in a household environment or similar.
2.
GENERAL CHARACTERISTICS
Module type
SIN-8
allows monitoring of 8 binary inputs. Standard transmission functions
of Modbus protocol make the device registers (address, state of inputs, device ID) accessible
via RS-485 interface.
3.
TECHNICAL DATA
Power supply voltage
16...
24
...30V DC
(separated)
External fuse (required)
T - type, max. 1 A
Current consumption
20mA typically
Number of independent inputs
8
Input levels - low state:
high state:
0V
24V
Galvanic isolation
All inputs are galvanically isolated from module supply
and RS-485 interface
Communication interface
RS 485, 8N1 / Modbus RTU
Baud rate
1200 ÷ 115200 bit/s
Number of modules in 1 network
maximum 128
Data memory
non-volatile memory, EEPROM type
Protection level
IP 20 (housing and connection clips)
Housing type
Housing dimensions (L x W x D)
DIN rail mounted (35 mm rail)
101 x 22.5 x 80 mm
Operating temperature
(depending on version)
0°C to +50°C
or -20°C to +50°C
Storage temperature
(depending on version)
-10°C to +70°C
or -20°C to +70°C
Humidity
Altitude
5 to 90% no condensation
up to 2000 meters above sea level
Screws tightening max. torque
0.5 Nm
Max. connection leads diameter
2.5 mm
2
EMC
according to: PN-EN 61326-1
3
!
!
Summary of Contents for SIN-8
Page 11: ...User manual MODULE SIN 8 11 ...
