Simex SIN-8, User Manual

Page: 2 / 12

User manual - MODULE SIN-8
CONTENTS
1. BASIC REQUIREMENTS AND USER SAFETY........................................................................................ 2
2. GENERAL CHARACTERISTICS................................................................................................................ 3
3. TECHNICAL DATA...................................................................................................................................... 3
4. DEVICE INSTALLATION............................................................................................................................ 4
4.1. UNPACKING....................................................................................................................................... 4
4.2. CONNECTION METHOD................................................................................................................... 4
4.3. MAINTENANCE.................................................................................................................................. 6
5. PRINCIPLE OF OPERATION..................................................................................................................... 7
6. THE MODBUS PROTOCOL HANDLING................................................................................................... 8
6.1. LIST OF REGISTERS........................................................................................................................ 9
6.2. TRANSMISSION ERRORS DESCRIPTION...................................................................................... 9
6.3. EXAMPLES OF QUERY/ANSWER FRAMES................................................................................... 9
Explanation of symbols used in the manual:
- This symbol denotes especially important guidelines concerning the installation and
operation of the device. Not complying with the guidelines denoted by this symbol
may cause an accident, damage or equipment destruction.
IF THE DEVICE IS NOT USED ACCORDING TO THE MANUAL THE USER IS
RESPONSIBLE FOR POSSIBLE DAMAGES.
- This symbol denotes especially important characteristics of the unit.
Read any information regarding this symbol carefully
1. BASIC REQUIREMENTS AND USER SAFETY
-
The manufacturer is not responsible for any damages caused by
inappropriate installation, not maintaining the proper environmental
conditions and using the unit contrary to its assignment.
- Installation should be conducted by qualified personnel . During installation all
available safety requirements should be considered. The fitter is responsible for
executing the installation according to this manual, local safety and EMC
regulations.
- The unit must be properly set-up, according to the application. Incorrect
configuration can cause defective operation, which can lead to unit damage or
an accident.
-
If in the case of a defect of a unit malfunction there is a risk of a serious
threat to the safety of people or property additional, independent systems
and solutions to prevent such a threat must be used.
- Neighbouring and connected equipment must meet the appropriate standards
and regulations concerning safety and be equipped with adequate overvoltage
and interference filters.
2
i
!
!