Simex Simpact SLIK-73, User Manual

Page: 40 / 44

User manual for universal counter with batching function SLIK-73
10. DEFAULT AND USER'S SETTINGS LIST
Parameter Description Default value User's value
Desc.
page
Parameters of relay R1 operation (“rELAy1” menu)
SEtP Relay threshold 100 24
modE Operation mode of relay on 24
timE The time period of the relay active state 0.0 24
unit Unit of “timE” parameter SEC 24
Settings of programmable input, zeroing, filtering, and counting mode
Pr inP Programmable input function diSAbL 24
rESEt Clearing (zeroing) source of main counter ALL 25
ArESEt Autoreset function on 25
FiLtEr Digital filtration rate 0 26
Funct Counting mode quAd-1 26
Prescaler settings (menu “PrESCA”)
muL multiplier 1 26
div divider 1 26
oFFSEt Offset - constant value added to the result to move
the zero point of the current scale
0
26
Point Decimal point position 0.00 26
RS 485 interface configuration (“rS-485” menu)
Addr Device address 1 27
bAud Baud rate 9600 27
mbAccE Permission to changes of configuration registers on 27
mbtimE Maximum delay between received messages 0 27
rESP Additional delay of answer transmission Std 27
Settings of access to the configuration parameters (“SECu” menu)
A rEL Permission to changes of relay R1 threshold
without of the user password knowledge
oFF
28
A oFFS Permission to changes of the offset without of the
user password knowledge
oFF
29
Display parameters
briGHt Display brightness bri6 30
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 30
40