35
– press “
P
” to store the operation in memory and go on to the
next program
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
RUN
Fig. 42
– repeat the same procedure to set the remaining programs
– when finished programming, set the selector to “
RUN
” po-
sition.
Deleting one or more programs
The on and off time must be deleted for each program to be
deleted.
Set selector (2) to position “
P
”. Select the desired program
with button (3), then press button (4) to delete the day setting
(the triangular symbols for the days should go away). If part
of the program is deleted, when you set selector (2) back to
the “
RUN
” position an error will appear in the clock display,
referring to the program which is incorrect.
To delete all programs, put the selector in position “
P
” and
press buttons (3) and (6) at the same time.
Setting the SKIP function
The SKIP function deactivates programs for the next day and
resumes regular programming 24 hours later. This function is
useful if you will be out all day and don’t need heating.
To start this function, press button (8), which is active only
when selector (2) is in “
RUN
” position.
Once you have selected the SKIP function, it will go into effect
at 0:00 of the next day for 24 hours.
You cannot turn it off once it has started, so regular program-
ming will not resume until 24 hours have passed.
