12
– N. 1 blind flange PN6 DN 50 for gas collector with gasket
and fixing screws, code 6105150
– N. 2 blind flanges PN6 DN 100 for system delivery/return
collectors with gasket and fixing screws, code 6105155
Raccordo a 45° cod. 6034301
Tubo in plastica cod. 6034301
Tappo cod. 6034303
ORIENTAMENTO ALBERO
REGOLAZIONE SFERA
CURVA DI
SCARICO
NIPPLO 3/4"
POSIZIONE MONTAGGIO LEVA
COLLETTORE
DI RITORNO
G
M
R
M2
– N. 2 kit of three-way/gas delivery/return cocks with connection tubes,
nipple 1”, check valve and gaskets
(MURELLE EQUIPE 220 ErP)
– N. 3 kit of three-way/gas delivery/return cocks with connection tubes,
nipple 1”, check valve and gaskets
(MURELLE EQUIPE 330 ErP)
– N. 4 kit of three-way/gas delivery/return cocks with connection tubes,
nipple 1”, check valve and gaskets
(MURELLE EQUIPE 440 ErP)
– N. 5 kit of three-way/gas delivery/return cocks with connection tubes,
nipple 1”, check valve and gaskets
(MURELLE EQUIPE 550 ErP)
– N. 6 kit of three-way/gas delivery/return cocks with connection tubes,
nipple 1”, check valve and gaskets
(MURELLE EQUIPE 660 ErP)
CAUTION: Before assembling the three-way drain cocks, direct the ball
regulator shaft as indicated in the figure.
M C.H.
flow
R C.H.
return
G Gas
M2 D.H.W. tank flow
Fig. 5/d
Fig. 5/e
Fig. 5/f
– N. 1 condensate drain collector consisting of 2 fittings, 2 tubes
and 1 cap. Moreover, the collector is supplied with brackets,
nuts and M8 fixing screws
(MURELLE EQUIPE 220 ErP)
– N. 1 condensate drain collector consisting of 3 fittings, 3 tubes
and 1 cap. Moreover, the collector is supplied with brackets,
nuts and M8 fixing screws
(MURELLE EQUIPE 330 ErP)
– N. 1 condensate drain collector consisting of 4 fittings, 4 tubes
and 1 cap. Moreover, the collector is supplied with brackets,
nuts and M8 fixing screws
(MURELLE EQUIPE 440 ErP)
– N. 1 condensate drain collector consisting of 5 fittings, 5 tubes
and 1 cap. Moreover, the collector is supplied with brackets,
nuts and M8 fixing screws
(MURELLE EQUIPE 550 ErP)
– N. 1 condensate drain collector consisting of 6 fittings, 6 tubes
and 1 cap. Moreover, the collector is supplied with brackets,
nuts and M8 fixing screws
(MURELLE EQUIPE 660 ErP)
45° fitting code 6034301
Plastic tube code 6034301
Cap code 6034303
LEVER ASSEMBLY POSITION
SHAFT DIRECTION
BALL ADJUSTMENT
RETURN
COLLECTOR
DRAIN
CURVE
NIPPLE
3/4”
Summary of Contents for MURELLE EQUIPE 220 ErP
Page 26: ...26 6 CASCADE MANAGEMENT 2 INSTALLER BUTTONS cd...
Page 43: ......
