Sime ALU HE, User, Installation And Servicing Instructions

Page: 54 / 100

54
EN
1 USING THE BOILER ALU HE
1.1 Control panel
The control panel allows all operators to make all adjustments
necessary to manage
Sime ALU HE
boilers and connected
systems.
3
1
2
4
5
Fig. 1
1
DISPLAY ICONS DESCRIPTION
l
SUMMER MODE ICON
.
n
WINTER MODE ICON .
r
DHW MODE ICON
.
u
HEATING MODE ICON .
v
GRADUATED OUTPUT SCALE
. The segments of the
bar light up in proportion to the output delivered by
the boiler.
f
BURNER OPERATION AND BLOCKING ICON
.
h
RESET REQUIRED ICON
.
z
CHIMNEY SWEEP FUNCTION ICON
.
i
SECONDARY DIGITS
. The boiler displays the system's
pressure value.
j
MAIN DIGITS
. The boiler displays the values set, fault
status and outdoor temperature.
E
SUPPLEMENTARY SOURCES PRESENT ICON
.
2
DESCRIPTION OF COMMANDS
T
ON/OFF BUTTON
.
ON = Boiler has electric power.
OFF = Boiler has electric power but is not available
for operation. The protection functions are on,
however.
U
SUMMER MODE BUTTON . By pressing this button the
boiler operates only on demand for domestic hot
water
(function not available)
.
V
WINTER MODE BUTTON
. By pressing this button the
boiler operates for heating and domestic hot water.
W
SET DHW BUTTON
. By pressing this button the
temperature of the domestic hot water is displayed
(function not available) .
X
SET HEATING BUTTON
. With the first press of this
button the temperature of heating circuit 1 is
displayed. With the second press of this button the
temperature of heating circuit 2 is displayed. With
the third press of this button the temperature of
heating circuit 3 is displayed.
Y
RESET BUTTON
. Lets you reset operation after an
operating error.
J
INCREASE BUTTON
. By pressing this button the value
set is increased.
Q
REDUCE BUTTON
. By pressing this button the value
set is reduced.
3
BUTTONS RESERVED FOR INSTALLER (access to INST
parameters and OEM parameters)
c
CONNECTION THROUGH PC
. To be used only with
the SIME programming kit and only by authorised
personnel. Do not connect other electronic devices
(cameras, phones, MP3s etc.). Use a tool to remove
the cap and replace it after use.
w
WARNING: Communication port sensitive to static
electricity
. Before use, it is advisable to touch an
earthed metal surface to get rid of static electricity.
L
INFORMATION BUTTON
. Press the button several
times to scroll through the parameters.
M
CHIMNEY SWEEP FUNCTION BUTTON
. Press the button
several times to scroll through the parameters.
N
REDUCE BUTTON
. For changing the default values
set.
Z
INCREASE BUTTON
. For changing the default values
set.
4
LIGHT BAR
Blue = Operation.
Red = Operating error.
5
TIMER (optional)
Mechanical timer (code 8092228) or digital timer (code 8092229)
for programming heating/dhw.