39
EN
14:32
Reset
Confirm operation?
Confirm
12:12
Backlight reduction
80
12:12
Backlight
5
MIN
14:32
Colors
White
Black
FACTORY RESET
12:12
- 0.1°C
22.0 °C
Sensor
Brightness in stand-by mode:
after the set time, the display
will decrease the brightness of
the selected value (setting 100
will cause the display to switch
off entirely).
Sensor calibration:
the room tem-
perature sensor can be calibrat-
ed to make it more accurate in
relation to the installation site.
In case of positioning the power
supply in the back of the junction
box , it is recommended to cali-
brate the room temperature sen-
sor, setting the value at -2 °C.
Factory settings:
allows
for resetting the facto-
ry settings of the
SIME
SMART PLUS
device.
14:32
Confirm request
Confirm operation?
Confirm
14:32
Confirm request
Confirm operation?
Confirm
TECHICIAN
13:54
Techician
Hot water
[...]
Boiler parameters
[...]
Activation request delay
120s
Reset alarm history
[...]
Factory reset history
[...]
14:32
0 0 0 0 0
Access code request
Code
15:19
Hot water
Enable Anti-Legio
Si
Intervention day
Mon
Intervention time
02:00
Hot water: it is possible to enable
and set the ANTI-LEGIONELLA
FUNCTION which runs a disinfec-
tion cycle through a weekly ther-
mal shock (the day and time can
be set).
Enable it
ONLY
if a domestic hot
water storage tank is present.
RESET ALARM HISTORY
FACTORY RESET HISTORY
14:32
Confirm request
Confirm operation?
Confirm
Technician:
access to this menu is protected by an access code and is only allowed for
qualified technical personnel
.
Unauthorised modification of the parameters can jeopardise the boiler’s operation.