Sime 8092280, Installation And Use Manual

Page: 35 / 96

35
EN
– Rotate the encoder to modify the “data/value” (eg.
from 36 to 50)
SETTING DATE AND HOUR
DAY MONTH
HOUR MINUTE
YEAR
Cancel Confirm
Date 01 Jan 2014
Hour 12 : 50
– Press the encoder
click
to confirm the modification and se-
lect the next
“data/value”
which will be highlighted (eg. 01)
– Continue in this way until all the necessary modifications
have been made
– After all modifications have been made, press the button
Confirm
to go back to the initial submenu (Date and time).
NB:
The user must work in a CIRCULAR manner ("rounda-
bout") therefore, ALWAYS MOVING FORWARDS, even if a mis-
take has been made.
– Rotate the encoder to select another
“Menu”
(eg. Fac-
tory settings)
GENERAL SETTINGS
Esc Back
Language ENG
Date and time [...]
Factory settings [...] Factory settings
m
WARNING
It is recommended that you ONLY go into this submenu
if you want to go back to
“Factory settings”
deleting all
settings made by the user.
Otherwise, press the button
Esc
or
Back
.
If you wish to proceed:
– Press the encoder
click
to go into a modifiable area. A
screen appears offering the following options:
Cancel Confirm
CONFIRM REQUEST
Confirm operation?
– Press the button
Cancel
to go back to the “Menu” se-
lected previously (Factory settings)
– Press the button
Confirm
to restore the
“Factory settings”
and after a few seconds go back to the “main menu”