22
EN
First place the left one, lifting the
collector’s upper and lower fixing
washers 8. When the collector is
placed under, we slightly tighten
the M8 screws and nuts with the
collector’s fixing washers 8 in order
to temporarily restrain it and easily
center it with the system. Place the
mechanically tightened unions Ø22
at the collector’s edges.
First place the left one at the bot-
tom part 5, lifting the upper part 5.
Place the screws and the collector’s
fixing washers (4 for each collector)
without tightening them.
Place mechanically tightened Ø22
unions at the edges of the collector
Join the second collector and ti-
ghten the union*.
Screw on the two supports 7 of
the tank. Tighten all screws on the
base.
Place and tighten the Ø22 mechanically tightened plug on the top right and on the bottom left of the collector/collectors*.
Place the water storage tank on the base with its electrical components to the left, when viewing the water storage tank from the front.
