19-6422-M-01 Rev 4
10
The Model 6422e Blower can be securely mounted using the
supplied U-bracket. It is recommended that the Blower be mounted
using the supplied truss-head screws through the 1/4 in. (6.3 mm)
diameter mounting holes on the bottom of the bracket. The
mounting holes are spaced 1 ft. (25.4 mm) apart on the centerline
of the bracket.
Figure 5. U-bracket Holes for Mounting
The tilt angle of the Blower can be adjusted using the T-knobs on
the sides of the unit. To securely lock the Blower at a desired angle,
replace the T-knobs with the supplied M4x12 mm stainless steel
truss head screws (p/n 28-3369) using a Phillips head screwdriver.
Figure 6. U-bracket Side T-knob for Tilt Adjustment
Summary of Contents for 6422e
Page 9: ...19 6422 M 01 Rev 4 6...
Page 31: ...19 6422 M 01 Rev 4 28...
Page 32: ...19 6422 M 01 Rev 4 29 Notes...
Page 33: ...19 6422 M 01 Rev 4 30 Notes...
