19-6422-M-01 Rev 4
9
2.2 Blower Placement
The following points should be considered when positioning the
Model 6422e Blower:
• Keep at least 2 in. (5.1 cm) of free space at the rear of the unit
for unimpeded air intake.
• For fastest decay times, position the Blower close to the target
area where static removal is desired.
• Aim the Blower so that its airflow travels directly to your target.
See
Table 1 Performance
on page 4 for approximate decay
times versus distance.
• Keep grounded objects away from the ionized airstream to
avoid the possibility of increased offset voltages.
Figure 4. Model 6422e with U-bracket
Caution:
Do not use this Blower in an explosive environment. Poorly
maintained ionizers could produce electric arcs at the emitter
points and lead to detonation in an explosive environment.
Achtung:
Verwenden Sie dieses Gebläse nicht in
explosionsgefährdeten Bereichen. Schlecht gewartete
Ionisatoren können an den Emitter-Punkten Lichtbögen
erzeugen und in explosiver Umgebung eine Explosion
auslösen.
Summary of Contents for 6422e
Page 9: ...19 6422 M 01 Rev 4 6...
Page 31: ...19 6422 M 01 Rev 4 28...
Page 32: ...19 6422 M 01 Rev 4 29 Notes...
Page 33: ...19 6422 M 01 Rev 4 30 Notes...
